Marine-Tex Gluvit Waterproof Epoxy Sealer Qt Kit RM330K | S2

Marine-Tex Gluvit Waterproof Epoxy Sealer Kit #185-RM330K

• Size: Quart
• Paintable epoxy seeks, fills and seals cracks in fiberglass, wood and metal. Hard protective coating flexes with hull movements. Deteriorated wood can be renewed with a few strokes to penetrate and strengthen stringers, decking and molding. Also seals leaky aluminum seams, rivets, and leaks around cabins or decks. On wooden hulls, Gluvit seals and protects planks and sheeting against water absorption and marine parasites. On aluminum hulls, Gluvit seals seams and rivets and acts as a barrier coat to minimize glavanic corrosion. Long working time. Easily topcoated with bottom or topside coatings and most paints.
• Quart kit covers approx. 25 to 35 sq. ft. 6 to 8 mils.

• Marine‑Tex Epoxy Putty 2 oz Gray RM301K — curing time

  • At ~72 °F (about 22 °C), the putty cures in 24 hours.

  • The working (pot) time — i.e. time in which you can shape or apply it — is ~30 minutes when mixed and spread thin at 72 °F. 

  • If you’re at lower temperatures (work area below ~55 °F), expect significantly longer cure times or slower curing. 

  If you like — I can give you a full cure vs partial-cure timeline table (pot-life, set-up, full cure) for different ambient temps so you know what to expect depending on your workshop conditions.